In 2003, the U.S. Fish and Wildlife Service conducted a prescribed burn over a large part of the northeastern corner of the Sevilleta National Wildlife Refuge. Following this burn, a study was designed to look at the effect of fire on above-ground net primary productivity (ANPP) (i.e., the change in plant biomass, represented by stems, flowers, fruit and foliage, over time) within three different vegetation types: mixed grass (MG), mixed shrub (MS) and black grama (G). Forty permanent 1m x 1m plots were installed in both burned and unburned (i.e., control) sections of each habitat type. The core black grama site included in SEV129 is used as a G control site for analyses and does not appear in this dataset. The MG control site caught fire unexpectedly in the fall of 2009 and some plots were subsequently moved to the south. For details of how the fire affected plot placement, see Methods below. In spring 2010, sampling of plots 16-25 was discontinued at the MG (burned and control) and G (burned treatment only) sites, reducing the number of sampled plots to 30 at each.
To measure ANPP (i.e., the change in plant biomass, represented by stems, flowers, fruit and foliage, over time), the vegetation variables in this dataset, including species composition and the cover and height of individuals, are sampled twice yearly (spring and fall) at each plot. The data from these plots is used to build regressions correlating biomass and volume via weights of select harvested species obtained in SEV157, "Net Primary Productivity (NPP) Weight Data." This biomass data is included in SEV185, "Burn Study Sites Seasonal Biomass and Seasonal and Annual NPP Data."
Collecting the Data:
Net primary production data is collected three times each year, winter, spring, and fall, for all burn sites. Spring measurements are taken in April or May when shrubs and spring annuals have reached peak biomass. Fall measurements are taken in either September or October when summer annuals have reached peak biomass but prior to killing frosts. Winter measurements are taken in February before the onset of spring growth and only creosote is measured.
Vegetation data is collected on a palm top computer. A 1-m2 PVC-frame is placed over the fiberglass stakes that mark the diagonal corners of each quadrat. When measuring cover it is important to stay centered over the vegetation in the quadrat to prevent errors caused by angle of view (parallax). Each PVC-frame is divided into 100 squares with nylon string. The dimensions of each square are 10cm x 10cm and represent 1 percent of the total area.
The cover (area) and height of each individual live (green) vegetative unit that falls within the one square meter quadrat is measured. A vegetative unit consists of an individual size class (as defined by a unique cover and height) of a particular species within a quadrat. Cover is quantified by counting the number of 10cm x 10cm squares filled by each vegetative unit. It is possible to obtain a total percent cover greater than 100% for a given quadrat because vegetative units for different species often overlap.
Niners and plexidecs are additional tools that can help accurately determine the cover a vegetative unit. A niner is a small, hand-held PVC frame that can be used to measure canopies. Like the larger PVC frame it is divided into 10cm x 10cm squares, each square representing 1% of the total cover. However, there are only nine squares within the frame, hence the name “niner.” A plexidec can help determine the cover of vegetative units with covers less than 1%. Plexidecs are clear plastic squares that are held above vegetation. Each plexidec represents a cover of 0.5% and has smaller dimensions etched onto the surface that correspond to 0.01%, 0.05%, 0.1%, and 0.25% cover.
It is extremely important that cover and height measurements remain consistent over time to ensure that regressions based on this data remain valid. Field crew members should calibrate with each other to ensure that observer bias does not influence data collection
Grasses-To determine the cover of a grass clump, envision a perimeter around the central mass or densest portion of the plant, excluding individual long leaves, wispy ends, or more open upper regions of the plant. Live foliage is frequently mixed with dead foliage in grass clumps and this must be kept in mind during measurement as our goal is to measure only plant biomass for the current season. In general, recently dead foliage is yellow and dead foliage is gray. Within reason, try to include only yellow or green portions of the plant in cover measurement while excluding portions of the plant that are gray. This is particularly important for measurements made in the winter when there is little or no green foliage present. In winter, sometimes measurements will be based mainly on yellow foliage. Stoloniferous stems of grasses that are not rooted should be ignored. If a stem is rooted it should be recorded as a separate observation from the parent plant.
Forbs, shrubs and sub-shrubs (non-creosote)-The cover of forbs, shrubs and sub-shrubs is measured as the horizontal area of the plant. If the species is an annual it is acceptable to include the inflorescence in this measurement if it increases cover. If the species is a perennial, do not include the inflorescence as part of the cover measurement. Measure all foliage that was produced during the current season, including any recently dead (yellow) foliage. Avoid measuring gray foliage that died in a previous season.
Cacti-For cacti that consist of a series of pads or jointed stems (Opuntia phaecantha, Opuntia imbricata) measure the length and width of each pad to the nearest centimeter instead of cover and height. Cacti that occur as a dense ball/clump of stems (Opuntia leptocaulis) are measured using the same protocol as shrubs. Pincushion or hedgehog cacti (Escobaria vivipara, Schlerocactus intertextus, Echinocereus fendleri) that occur as single (or clustered) cylindrical stems are measured as a single cover.
Yuccas-Make separate observations for the leaves and caudex (thick basal stem). Break the observations into sections of leaves that are approximately the same height and record the cover as the perimeter around this group of leaf blades. The caudex is measured as a single cover. The thick leaves of yuccas make it difficult to make a cover measurement by centering yourself over the caudex of the plant. The cover of the caudex may be estimated by holding a niner next to it or using a tape measure to measure to approximate the area.
Height is recorded as a whole number in centimeters. All heights are vertical heights but they are not necessarily perpendicular to the ground if the ground is sloping.
Annual grasses and all forbs-Measure the height from the base of the plant to the top of the inflorescence (if present). Otherwise, measure to the top of the green foliage.
Perennial grasses-Measure the height from the base of the plant to the top of the live green foliage. Do not include the inflorescence in the height measurement. The presence of live green foliage may be difficult to see in the winter. Check carefully at the base of the plant for the presence of green foliage. If none is found it may be necessary to pull the leaf sheaths off of several plants outside the quadrat. From this you may be able to make some observations about where green foliage is likely to occur.
Perennial shrub and sub-shrubs (non-creosote)-Measure the height from the base of the green foliage to the top of the green foliage, ignoring all bare stems. Do not measure to the ground unless the foliage reaches the ground.
Plants rooted outside but hanging into a quadrat-Do not measure the height from the ground. Measure only the height of the portion of the plant that is within the quadrat.
Creosote Measurements till 2013:
To measure creosote (i.e., Larrea tridenta) break the observations into two categories:
1.) Small, individual clusters of foliage on a branch (i.e., branch systems): Measure the horizontal cover of each live (i.e., green) foliage cluster, ignoring small open spaces (keeping in mind the 15% guideline stated above). Then measure the vertical "height" of each cluster from the top of the foliage to a plane created by extending a line horizontally from the bottom of the foliage. Each individual foliage cluster within a bush is considered a separate observation.
2.) Stems: Measure the length of each stem from the base to the beginning of live (i.e., green) foliage. Calculate the cumulative total of all stem measurements. This value is entered under "height" with the species as "stem" for each quadrat containing creosote. All other variable receive a default entry of "1" for creosote stem measurements.
Do not measure dead stems or areas of dead foliage. If in doubt about whether a stem is alive, scrape the stem with your fingernail and check for the presence of green cambium.
Creosote Measurements 2013 and after:
Each creosote is only measured as one total cover. Each quad that contains creosote will have one cover observation for each creosote canopy in quad.
Recording the Data:
Excel spreadsheets are used for data entry and file names should begin with the overall study (npp), followed by the date (mm.dd.yy) and the initials of the recorder (.abc). Finally, the site abbreviation should be added (i.e., mg, ms, or g). The final format should be as follows: npp_burn.mm.dd.yy.abc.xls. File names should be in lowercase.
August 2009 Burn:
On August 4, 2009, a lightning-initiated fire began on the Sevilleta National Wildlife Refuge. The fire reached the Mixed-Grass Unburned plots on August 5, 2009, consuming them in their entirety. As a result, in the spring of 2010, the Mixed-Grass (MG) unburned plots were moved to a different area within Deep Well, southwest of the Warming site.
Also, on August 4, 2009, some of the webs and quadrats within the unburned Black Grama (G) site were impacted by the fire. Thus, webs 2 and 3 were abandoned and extra plots added to areas within webs 1, 4, and 5 that were not burned. Changes were as follows:
Webs 1, 4, and 5: A plot was added to the northeast to compensate for the loss of all plots at webs 2 and 3.
Web 4: A plot was added to the northwest to compensate for the northern plot, which was burned.
01/13/2011-Burn NPP quad data was QA/QC'd and put in Navicat. Matadata updated and compiled from 2004-2010. The mixed-grass unburned plot was moved to the south after the original plot burned unexpectedly in the fire of August 2009. (JMM) 11/28/2009-Burn NPP quad data was QA/QC'd and put in Navicat. Metadata updated and complied from 2004-2009. Mixed-grass unburned data (Fall 2009) was not collected due to unexpected fire at Sevilleta LTER in Aug 2009. (YX) 01/14/09-Metadata updated and compiled from 2004-2008 data. As of 2007, winter measurements are longer being taken. (YX) 12/20/2008-This data was QAQC'd in MySQL. I checked for duplicates and missing quads. (YX)
Other researchers involved with collecting samples/data: Chandra Tucker (CAT; 04/2014-present), Megan McClung (MAM; 04/2013-present), Stephanie Baker (SRB; 09/2010-present), John Mulhouse (JMM; 08/2010-04/2013), Amaris Swann (ALS; 08/2008-01/2013), Maya Kapoor (MLK; 08/2003-01/2005, 05/2010-03/2011), Terri Koontz (TLK; 02/2000-08/2003, 08/2006-08/2010), Yang Xia (YX; 01/2005-03/2010), Karen Wetherill (KRW; 02/2000-08/2009); Michell Thomey (MLT; 09/2005-08/2008); Seth Munson (SMM; 09/2002-06/2004), Jay McLeod (JRM; 01/2006-08/2006); Caleb Hickman (CRH; 09/2002-11/2004), Charity Hall (CLH; 01/2005-01/2006); Tessa Edelen (MTE, 08/2004-08/2005).Data updated 08/18/15: MOSQ changed to MUSQ3; ARPUP6 changed to ARPU9; SPWR changed to SPPO6; a single entry BOER changed to BOER4.
See all Sevilleta Publications